Gypsum briquette machine is used to briquette gypsum to make it with shapes like a ball, pillow, etc. Most of the gypsum used is the desulfurization gypsum, so it is always called as desulfurization gypsum briquette machine for this wide usage. Besides, another common gypsum for briquetting is phosphogypsum from the fertilizer plant.
The Desulfurization Gypsum
Desulfurization gypsum has another name as FGD gypsum (flue gas desulfurization gypsum), most of which comes from the power station as a byproduct. It’s chemically nearly identical to natural gypsum from the mine, but with higher purity and fineness. Also with higher moisture (12-17%). It will show different colors from the fuel we used and the dust collect affection we get.
Why Make Gypsum Briquette
These desulfurization gypsums, with powdery status, are hard for transportation and storage. Dust pollution is also caused by it. Making briquette from this raw material will help to solve these problems. Those briquettes, after carefully dealt with charcoal briquette machine, can be used to make a lot of product. Here are some of the examples:
1. Used to produce cement retarder.
2. Make gypsum.
3. Produce a gypsum board.
4. Used to make building plaster.Turn these waste gypsum to valuable sources create a way for recycling and make value for us.
Gypsum Briquette Machine For Sale
The waste gypsum is a source where you can find extra value with the proper process to deal with. It not only helps to make a profit from it but also makes an environmental protection by reducing the cost of natural gypsum. For manufacturers like cement plants who buy these waste gypsum briquettes, it also helps them to reduce their running costs. It’s really a good industry to involve in.
The Gypsum Briquette Plant Process
Gypsum briquette making follows a very efficient way of briquetting as no binder is needed for this process. Normally the following equipment is needed to set up the plant: dryer, charcoal briquette machine, other accessories like conveyors, feeder.
The whole process normally follows this way:
Raw Gypsum ⇒ Feeding ⇒ Drying ⇒ Briquetting ⇒ Finish Briquette
The raw gypsum first fed in the gypsum charcoal briquette production line with a feeder, then it comes to a dryer(normally we choose rotary dryer) to reduce the moisture, the dried gypsum powder then is suitable for briquetting and briquette by a gypsum briquette machine, the output briquette then put in a dryer to reduce its moisture for our standard for storage or selling or something we want to.
Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
.jpg)
.jpg)
