Charcoal briquette machine’s raw materials can target at almost all plant raw materials, if the source is sufficient, can put into production in large quantities. At present, charcoal market is not to worry about from the market demand, some charcoal manufacturers appeared in short supply, even some users in not enough to buy equipment, has established the direction of sales. Now the market development of charcoal making machine is very broad, so investment can bring benefits in charcoal machine, also to meet the market demand. Fusmar Machinery is a professional charcoal briquette machine manufacturer, this article we will introduce the development of charcoal briquette machine industry in detail.
Select High Quality Charcoal Briquette Machine
Fusmar Machinery production of high quality charcoal making machine to avoid the occurrence of broken bar. Charcoal making machine if the production of broken rod, this is the impact of the use of charcoal making machine and output. At the same time, is the charcoal making machine in the use of the process did not achieve good results. This for the production of charcoal making machine manufacturers and the purchase of users are a great loss. Therefore, once the charcoal briquette machine broken bar phenomenon should solve in time. Semi-finished charcoal bar density to high, this link to focus on the semi-finished charcoal bar made by the briquette making machine quality, of course, the higher the density of charcoal out of the better. The design of carbonization furnace should be reasonable and the sealing should be strong.
Charcoal Briquette machine Moves Towards Cleaner
With the development of society and the continuous progress of science and technology, the environmental pollution we rely on is becoming more and more serious. The emergence of the charcoal making machine alleviates the current situation where environmental problems are too tense. More extensive selection of raw materials: The production of raw materials is diverse, branches, straw, peanut shell, trunk, cotton straw, tea seed shell, fruit shell, weeds, leaves and so on can use as raw materials, can turn waste into treasure. Good cleanliness: Environmental protection charcoal making machine without probe, no spark when burning, and small ash content. High energy: The calorific value of mechanical charcoal is 1000-1500kcal/kg higher than that of traditional charcoal. Low water content:Charcoal briquette machine production of charcoal after a series of treatment with the original production of charcoal water content is lower.
Charcoal Briquette Machine Industry How To Bring High Profits
For investment in the charcoal machine industry, not all users can bring high profits. One of the key point is the impact of the pros and cons of charcoal machine. So before investing in the charcoal machine industry, must have a comprehensive understanding of the pros and cons of the charcoal machine, so as to bring high profits. The material problem. The raw material is not clean, no matter in the clean sawdust wood residue, mixed with a certain amount of dust or other impurities, these impurities will carbonize flavor ash exists, the main way to solve the problem is to control the raw material transportation process, try to ensure that the raw material in the transportation process is not polluted. Storage conditions of raw materials. Try to avoid dust and soil pollution, but also to control the source of raw materials. The ash content of raw materials is high, which is also the problem of raw materials. Some raw materials have large ash content, such as rice husk, straw, weeds and so on. Charcoal briquette machine technology. Carbonization technology is the most important factor. If the temperature of carbonization is too high, carbon elements will escape from hydrogen and oxygen, so that carbon is relatively light and ash will not escape. In other words, the ash content of carbon increases relatively. Due to the material is not clean and caused by the ash content is too large, the solution to this phenomenon is: the first way to deal with the problem is to control the material delivery process, try to ensure that the material in the delivery process is not polluted.
Charcoal making machine equipment is made the raw material such as bamboo sawdust, peanut shell, corn cob and so on into pellets by the biomass hammer mill, after drying molding by the dryer into carbonization furnace for carbonization. In order to meet customer needs in the production process. Fusmar Machinery not only provides complete set of charcoal briquette production line, but also provides a single machine in each production process.
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.